OKX download

iPhone 5 disassembly (internal disclosure: iPhone5 Decomposition process) Apple released the iPhone 5 in 2012. This mobile phone adopts a new design,OKX download thinner, lighter and faster structure. However, if we want to know how it works inside, we must take it apart and reveal its mysterious internal structure. In this article, we will introduce the disassembly process of iPhone 5 step by step, so that you can better understand the internal structure and working principle of this mobile phone. 1. The first step of tool preparation to disassemble the iPhone 5 is to prepare the necessary tools, including various screwdrivers, glue openers, suction cups, tools for placing screws, etc. In order to avoid damaging the shell or parts during the disassembly process, we need to choose high-quality tools, and also need to be patient and careful. Two. First of all, to remove the back cover, IYou need to use an item to replace the suction cup, such as a rubber pad, grab one side of the screen, then press the suction cup until the gap is pulled up, and gently insert it with a glue cutter and open the mobile phone shell. Next, we can gently tear off the back cover of the mobile phone with a nail clipper or a glue cutter. 3. After removing the battery and removing the back cover, we can see the internal structure of the mobile phone. In order to disassemble the battery, first use a screwdriver to remove the top metal cover, then use a suction cup to gently lift the battery, use a glue opener to separate the battery from the glue in the middle of the shell, and finally take the battery out of the mobile phone. Four. To remove the connector, the next step is to remove the connector. We need to remove the connectors of the display, camera, headphone jack and other parts. Use a screwdriver to remove the corresponding connector screw, and then gently remove the connector through the wire plug.5. Dismantling the motherboard is also a key link in the process. We need to remove some films and parts, such as volume buttons and power buttons, and then remove the connectors connecting the parts and the motherboard. Next, we need to use a screwdriver to remove the only screw at the bottom of the motherboard, and then gently take out the motherboard. 6. Disassemble the camera and other components. Then disassemble the camera and other components. We need to remove the camera module on the motherboard, as well as the microphone, vibrator and other parts. These components can be removed separately, or the motherboard can be removed first, and then they can be removed to ensure that they are carefully safe during parts removal. 7. In summary, disassembling iPhone 5 is a relatively complex task that requires a high degree of careful operation. The disassembly process requires patience and care, and requires high-quality tools to ensure that the shell or parts are not damaged.After disassembly, we can better understand the internal structure and working principle of iPhone 5, and may also fix any errors and malfunctions. In general, disassembling the iPhone 5 is an excellent way to experience this classic electronic product project in person. You can also try it.

Contact Us
Phone：020-83484635