OKX review

List of contents of this article:

• 1, Is the computer system installed on the memory stick?
• 2, Does the notebook need to reinstall the system
• 3、Does the computer need to reinstall the system with memory stick
• 4. Can the memory card install the system?
• 5、 Can the memory card install the computer system? | Memory card installation computer system tutorial

Is the computer system installed on the memory stick?

1. To be precise: the system is a C disk partition installed in the hard disk. And the memory stick is plugged into the motherboard, next to the CPU, in the shape of a long strip. WantTo check the configuration of the computer, the easiest way is to install the "Master Lu" software. The default page after opening is the various configurations of the computer.

2. Windows is installed on the hard disk, which has nothing to do with the memory stick. The system is still there after replacing the memory stick. Memory is only used for caching, walking speed.

3. The computer system is installed in the hardware. When selecting, the system and the open programs will be in memory or occupy part of the virtual memory. The virtual memory is set in the hard disk of the computer. It is best not to set it to the system disk, so that there will be more temporary files for a long time, which will affect the stability and compatibility of the system.

4. This is not the case. The programs running in the computer need to be executed through memory, not in the installed memory. Virtual memory is a technology for computer system memory management.

Does the notebook need to reinstall the system

Replace the memory stick without reinstalling the system or installing the driver. Memory belongs to the underlying hardware, and the computer operating system is stored in the hard disk. Replacing the memory stick will not cause any damage to the operating system in the hard disk. When RAM is working, it can write (store) or read (take out) information from any specified address at any time.

Under normal circumstances, installing the memory stick does not need to reinstall the system, and only in a few cases does it need to reinstall the system. Here, the editor will introduce to you whether the notebook needs to reinstall the system when installing the memory stick.

The system is divided into 32-bit and 64-bit. If it is a 32-bit system, the system must be reinstalled when installing the memory stick.The maximum supported memory of a 32-bit system is 4G, while a 64-bit system can reach 128G and change it to 64-bit. If you don't plan to reinstall the system, it makes no sense to increase the memory.

Because the system is written on the hard disk. And the system on the hard disk will not be lost or changed due to power outages and other hardware changes. Therefore, the installation memory does not need to reproduce the installation system. But the system will have a process of discovering and installing new hardware. Usually, this process does not require human intervention.

Does the computer need to reinstall the system

The computer needs to reinstall the system with the memory stick. It should be noted whether the newly installed memory is compatible with the original hardware. The memory model must match the model of the memory slot on the motherboard, otherwise it cannot be inserted.Is the frequency of memory the same?

Replacing the memory stick does not require reinstalling the system or installing the driver. Memory belongs to the underlying hardware, and the computer operating system is stored in the hard disk. Replacing the memory stick will not cause any damage to the operating system in the hard disk. When RAM is working, it can write (store) or read (take out) information from any specified address at any time.

So as long as the model is right, you don't need to install the driver, let alone reinstall the system.

Can the memory card install the system?

Yes. Memory card + card reader = USB flash drive. USB Installation System Tutorial: Making a Boot Disk. ( W7 system 4GU disk, XP system 2G USB disk) Download the cabbage or old Maotao USB disk making software, install the software, start, and follow the prompts to make the boot disk.

In fact, it's possible. The memory card is inserted into the card reader, which is no different from the USB flash drive. It's just that the stability is not as good as the USB flash drive, but it can still be used to install the computer system. Next, the editor will introduce the tutorial of installing the computer system with the memory card.

Obviously, it's okay. I said it before., the memory card is a USB flash drive after it is inserted into the card reader. So how to install the system after the memory card becomes a USB flash drive? Next, the editor will share with you how to use a memory card as a USB flash drive to install the system.

No, the memory card needs to be driven, dear. It can't be used.

sd card can be regarded as a USB flash drive. It is no problem to install the system on it, but this sd card is not suitable for this kind of frequent reading and is easy to damage.

Can the memory card install the computer system? | Memory card installation computer system tutorial

Yes. Memory card + card reader = USB flash drive. USB Installation System Tutorial: Making a Boot Disk. ( W7 system 4GU disk, XP system 2G USB disk) Download the cabbage or old hair peach USB disk making software, install the software, start it, and follow the prompts to make the boot disk.

Since the memory card is also a storage medium, it is okay. After the memory card is inserted into the card reader, it can be made into a boot disk like a USB flash drive, and then used to install the win7 system. Next, the editor will introduce the method of installing the win7 system with a memory card as a USB disk.

If the current computer does not have a system or the system cannot start, you need to make a boot disk on another available computer. If you choose to install a 32-bit x86 system with a memory of 2G or less, and a memory of 4G or more, choose to install a 64-bit x64 system.

Prepare a memory card of about 8G (the system of win7 needs about 4G) and a card reader.Go to System Home to find a win8 system package to download, and then extract the ghost file (about 4G).

Generally speaking, the USB flash drive is used, and the memory card is also acceptable. The steps are: 1: Make the USB flash drive into a PE environment, search for general Pe from the Internet, and then download it. 2: Copy the iso or mirror file of the downloaded system to the designated location of the USB disk. 3: Set the computer to start from the USB disk. Just do it.

The specific operation is as follows: prepare a memory card of about 8GB. If you want to install WIN7, 4GB is enough, but it's better to be bigger. The card reader is ready, and the ordinary memory card cannot be directly inserted into the computer.